Ultimax General Replacement Pads. A high friction pad designed for general replacement use on cars, vans and SUV's (4x4s). Using shimmed, chamfered and slotted technology and incorporating EBC’s unique BRAKE-IN coating for super quick pad bed-in. Greenstuff - 2000 Series - Premium Street Pad. Premium street sport pad for cars up to 200bhp. General spirited street driving. Designed for premium street driving offering better brake effect up to 600°C (1100°F). EBC Greenstuff has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a NO DUST pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars and vehicles above 200bhp we strongly recommend Redstuff which DOES offer much less dust. Redstuff Ceramic - 3000 Series - For Highly Tuned Cars and Fast Street. Superstreet formula for cars above 200bhp and fastest street driving This material is a Kevlar® fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads. Yellowstuff - 4000 "R" Series - Full Race Pad Ultra high friction pads for race use but perfectly safe for street use (Formula 1846). Although a full race material and capable of high temperature use with very good wear life, this new formulation sets a new trend in race type brake pad compounds that can be used on the highway. The “bite” from cold is superb which is uncommon with race materials (normally requiring warm-up) and makes this a pad which can be safely used on both street and track. This new formulation has been used by numerous championship race and rally drivers and is truly a milestone in brake pad material development. Nominal friction coefficient 0.5 with zero rotor damage and similar dust to original pads. DOT-4 Brake Fluid General purpose glycol fluid with wet boiling point of 260°C/500°F for most modern motorcycle and automotive brake systems. CANNOT be mixed with Dot 5 silicone fluids. BF-307 A highly refined DOT 4 based Glycol fluid that has less tendency to cause vapour lock. Please remember that once you open this container it will start to degrade so it is important to use it, seal your vehicles brake system and discard the remainder of the can due to shelf life issues. CANNOT be mixed with Dot 5 silicone fluids. DOT-5 Brake Fluid Unlike Glycol fluids, silicone does not damage or stain paintwork and is fitted to some high quality US built motorcycles. It is IMPERATIVE to check your owners manual and NOT to mix this fluid with Glycol fluids (as above) otherwise damage can occur to hydraulic seals and your entire brake system. Ultimax BlackDash USR Slotted Rotors. Ultra quiet sport slotted brake rotors Manufactured using premium disc blanks mentioned above, the narrower multi slot design of the Ultimax sport rotor and the progressive angle at which the slots are machined creates a quiet running sport rotor that still has benefits of removing gas, dirt, water and debris and MAINTAINING parallel pad wear. EBC have always been honest enough to say that the biggest advantage of slotted rotors is the fact that they promote flat and parallel pad wear rather than allowing ridges to develop on pads and rotors which is typical of "drilled only" sport rotors. By preventing these ridges brakes stay more consistent throughout pad and rotor wear life (simple physics!).